I bought a TH-6 that had lived near the salt water (Puget Sound) for about
8 years. The cad-plated element clamps had to be hacksawed off the
elements (the aluminum was fine, although the rust from the clamps
had stained it). I bought a TH-7 upgrade kit, which included all-stainless
hardware (everywhere, including all the boom-to-element clamp bolts).
I cleaned all the aluminum using a Scotch-Brite pad, Comet cleanser,
lots of water and lots of muscle. The traps were all reused; all I did to
them was blow them out with compressed air (after removing the
plastic end-caps, which I replaced). That's my recommendation.
73 Mike N6MZ firstname.lastname@example.org
From: Balmforth, Kevin D
Subject: TH6 Problems - Help
To: CQ CONTEST
Previous E-discussion on refurbing Hygain traps got me started on refurbing an
old TH6DXX which has been out in the So. California smog for a few years.
Problem: some of the element joints have become so corroded that I can't
separate them, even with a pair of vise-grips (the universal antenna tool...).
Resistance across the joints is 3-5 ohms, which means I just can't leave them
this way. Has anybody had any experience with this problem?
Thanks - Kevin NC6U