It seems that Force 12 has some good antennas based on the comments noted on
this reflector. So I am considering getting one of the C3s for CONTESTING.
Can anyone supply me with a copy of Force 12's C3 antenna assembly manual. I
have their catalog and have seen all of the ads but want some more details
before I spend my family's entertainment budget (reference the thread on
Wifes, Kids, and Contests) on another "XXXX!" antenna.
I will be glad to send SASE and pay copying cost.
Good Luck to everyone in the CQWW SSB CONTEST this weekend. I will be
operating single band, single op, low power on 10 only. Hope there is some
decent propagation this time.
73,
Henry Pollock - WB4HFL
>From George Daughters" <G.DAUGHT@Forsythe.Stanford.EDU Sat Oct 28 00:26:28
>1995
From: George Daughters" <G.DAUGHT@Forsythe.Stanford.EDU (George Daughters)
Subject: ct/775 help
Dear contesters,
I've got an opportunity to use the new ICOM 775 DSP
for CW sweepstakes.
I have been using an IC 738, which has worked perfectly
with CT9.22, telling CT it was a 737, and changing the
address on the 738 to "3CH" which, I guess, is what CT
is looking for. As I said, it works great. This may be
of use to other contesters who have moved to a 738.
I tried the same scheme on the 775, setting the 775
address to 3CH, but still telling CT it was a 737.
No dice. It tells me "ICOM radio timeout." Any hints?
Do I need to tell CT it's some other radio? Do I need
to fix the adress? Help!
If anyone has solved this for the IC775DSP, I'd sure
like to know about it. When I've got a solution, I'll
make it available to anyone else who asks.
For now, I'd sure love it to play correctly for the
SSCW contest next weekend!
73,
george/ab6yl
g.daught@forsythe.stanford.edu
To: CQ-CONTEST@TGV.COM
>From N6IP Bob Wolbert" <n6ip@email.com Fri Oct 27 22:00:27 1995
From: N6IP Bob Wolbert" <n6ip@email.com (N6IP Bob Wolbert)
Subject: SUBSTITUTE FOR NEC PS2501-1?
Message-ID: <9509278148.AA814852827@espmail.email.com>
I am trying to help a friend build the Kenwood computer interface
described in the QST article but am having no luck in locating
the NEC PS2501-1 optoisolators that are shown in the schematic and
don't really want to pay a second source dealers price. Does
anyone know of a suitable substitute part or have a data sheet
on the 2501 that I could use to find an alternate part? Maybe
someone knows of a different circuit that uses different parts?
His rig is a TS450S/AT. Any help would be appreciated.
Thanks,
73 KC5DVT Wayne email...ehayes@vnet.ibm.com
Austin, Texas
____________
Don't worry abt that, Wayne. Use any opto, or even just a transistor.
Isolation really is not necessary--unless u find noise or ground loops, etc,
hi...
GL
73/Bob
N6IP
>From morpheus@kuwait.net () Sat Oct 28 10:38:54 1995
From: morpheus@kuwait.net () (morpheus@kuwait.net ())
Subject: cqww ssb
Message-ID: <m0t94uu-0002vGC@access.kuwait.net>
Hi all,
I'm work this contest as multi/singel with ik2ncj(luca) I hope we will work
yu all in the 20/15/10m 48 hour.
qsl via bureau or direct by cba.
thank you
-----------------------------------------------------------------------------
9K2HN | E-Mail: morpheus@kuwait.net |
Hamad Al-Nusif |--------------------------------------------------<
Kuwait City | This space is intentionaly left empty |
-----------------------------------------------------------------------------
|