[Top] [All Lists]

Rohn tower bolts - was Rhon tower bolts

Subject: Rohn tower bolts - was Rhon tower bolts
From: geoiii@bga.com (george fremin iii)
Date: Sat May 11 19:37:28 1996
>      YES, hardware stores can have SAE grade 5  bolts but NO they are not
>the fine thread variety that Rohn (that's R-o-h-n) specifies.  I haven't been
>able to find them off-the-shelf even in nut and bolt stores here is
>Washington State.  And watch out, since  many hardware store varieties are
>cadmium plated or some other "non-suitable" for outdoor use finish.

The bolts that were in the leg of the Rhon 25g tower section
that I got from Texas towers last month had what looked like
SAE 5 platted bolts in it.  I was able to buy bolts at 
my local hardware store that were the NF (fine thread) that
looked just like the bolts that I unpacked from the 
25g tower leg.  The bolts were not the galvanized 
bolts that I had seen in 25g/45g tower (new) that I have
installed before.  This was used on a short tower and
I plan on checking the bolts as it ages.


George Fremin III
Austin, Texas C.K.U.  "You don't need an antenna that big to work 40 meters."
WB5VZL                   -Local ham upon seeing the N5AU 40m yagi-

<Prev in Thread] Current Thread [Next in Thread>