CQ-Contest
[Top] [All Lists]

[CQ-Contest] test equipment wanted

Subject: [CQ-Contest] test equipment wanted
From: k4ik@subich.com (Joe Subich, K4IK)
Date: Thu Aug 14 15:18:20 2003
Why not use an antenna analyzer (MFJ?) ... you can set it to 
any frequency you want.  I would put a fixed 10 to 20 dB pad 
between it and the device under test and document signal levels 
before any problem (put it in your documentation book).  That 
would allow you to very quickly note any significant change 
in the system. 

73, 

   ... Joe, K4IK 
 


> -----Original Message-----
> From: cq-contest-bounces@contesting.com 
> [mailto:cq-contest-bounces@contesting.com] On Behalf Of David 
> Robbins K1TTT
> Sent: Thursday, August 14, 2003 12:45 PM
> To: YCCC; reflector cq-contest
> Subject: [CQ-Contest] test equipment wanted
> 
> 
> A recent radio failure points out a piece of test equipment I 
> would like
> to have on hand... basically something like a battery powered crystal
> calibrator that I could quickly plug in to a radio's antenna 
> jack, or on
> the other side of a filter or switch that is suspect, and test the
> receivers gross sensitivity.  A built in attenuator might be 
> nice also.
> Is there anything out there that does this?
> 
> 
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://www.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
>  
> 
> 
> ---------------------------------------------------------------
>     The world's top contesters battle it out in Finland!
> THE OFFICIAL FILM of WRTC 2002 now on professional DVD and VHS!
>        http://home1.pacific.net.sg/~jamesb/
> ---------------------------------------------------------------
> 
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
> 

<Prev in Thread] Current Thread [Next in Thread>