CQ-Contest
[Top] [All Lists]

Re: [ct-user] An easier way to create a bootable CD _ Roxio EasyCDCreato

To: <ct-user-bounces@contesting.com>, <cq-contest@contesting.com>,<ct-user@contesting.com>
Subject: Re: [ct-user] An easier way to create a bootable CD _ Roxio EasyCDCreator
From: "Steve Baron - KB3MM" <SteveBaron@StarLinX.com>
Reply-to: Steve Baron - KB3MM <SteveBaron@StarLinX.com>
Date: Tue, 1 Feb 2005 23:16:22 -0000
List-post: <mailto:ct-user@contesting.com>
iS THIS ON cd=rw DISKS?  cd=r?

----- Original Message ----- 
From: <kd4d@comcast.net>
To: <cq-contest@contesting.com>; <ct-user@contesting.com>
Sent: Tuesday, February 01, 2005 13:40
Subject: [ct-user] An easier way to create a bootable CD _ Roxio Easy
CDCreator


> Good morning, all:
>
> Mal, N7MAL, mentioned to me a much easier way to create a bootable
> DOS CD.  If you have Roxio Easy CD Creator (which I have pre-installed)
> on my Dell laptop computer (I have Version 5), you can start Easy CD
> Creator,  go to File->New CD Project->bootable CD, and you get
> a requestor for a file or floppy disk drive.
>
> If you don't have Roxio, you can download free tools from the Web
> to allow you to do this anyway, but it isn't as easy.  Let me know if
> you want the instructions for doing it the hard way!  :-)
>
> This is cool.  It looks like you can directly create a bootable CD from
> a floppy disk drive (or a disk device using VFD (Virutal Floppy Driver)
> if you don't have a disk drive.
>
> This way, you can configure a Windows 98SE boot floppy (basically
> DOS 7.1) the way you want it and instantly create a bootable CD!
>
> Thanks, Mal!
>
> 73,
>
> Mark, KD4D
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web:  http://www.k1ea.com/
>


_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/

<Prev in Thread] Current Thread [Next in Thread>