WILLIAMS, MARK S schrieb:
> Guys,
>
> I'm trying to set up computer control of an IC-736 with TR Log for this
> weekend's VHF test. I have "logcfg.dat" set up with Radio= IC736 and
> have tried just about every baud rate I can think of. I'm using an Icom
> CT17 (or whatever they call their interface box). The only baud rate I
> see any response from the radio is 9600 and at that rate I can change
> bands up and down from 160 to 75 meters and then the program goes crazy
> trying to figure out which band the radio is on. Anybody using a 736
> with TR log? Care to share your logcfg.dat settings?
>
> The rig is on loan. Actually I'm trying to get it configured for a
> friend. Have no manual for the radio.
>
> Please reply to the listserv and directly to me at k9gx@n4gn.com
>
> Thanks,
>
> Mark, K9GX
> _______________________________________________
>
Mark, I am using the same radio (Icom 738, same as 736 but no 6m band)
and using N1MM without a problem. Yes, rate 9600 bd is correct.
I configured it very easy. If you need some file from N1MM, I can send it.
73, Zik VE3ZIK, /9A, /T9, /YU, DO1SKY, 4N1DX
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|