CQ-Contest
[Top] [All Lists]

[CQ-Contest] Icom 746 as contesting rig

To: <cq-contest@contesting.com>
Subject: [CQ-Contest] Icom 746 as contesting rig
From: "Larry Schimelpfenig" <k7sv@adelphia.net>
Date: Mon, 24 Jul 2006 18:46:27 -0400
List-post: <mailto:cq-contest@contesting.com>
Some comments made in response to John W5TD's question were of interest to 
me.

I used a 746 as my only contest radio for four years. I had a pair of INRAD 
400hz cw filters in mine as well as an 1800hz filter for ssb.

I found that the receiver was prone to IMD on the lower bands with really 
big signals present. While Quack suggested that one turn the RF gain down, I 
found that a few db of attenuation nicely took care of the problem. Beyond 
that issue I found the 746 to be a great contesting rig. While I used the 
746 in the NAQPs, Sprints, Sweepstakes etc from home, I was operating the dx 
contests from multis using tricked out MPs loaded with filters and OMNI VIs 
also filled with filters. As far as the transceiver was concerned, I never 
felt that I was at a disadvantage when I went back to using the 746 from 
home.

My pal Mike K4GMH uses a pair of 746s for his SO2R contesting, mostly RTTY. 
He almost always has one of the top scores from the U.S.. He doesn't seem to 
have any problems heari

I found the 746 to be a full featured, really decent contesting rig.

73 de Larry K7SV


_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>