Yes, and yes.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
-----Original Message-----
From: N1MMLogger@yahoogroups.com [mailto:N1MMLogger@yahoogroups.com] On
Behalf Of Barry
Sent: Saturday, January 19, 2008 14:32
To: N1MMLogger@yahoogroups.com
Subject: [N1MM] NAQP Multi-Op Names
I'm operating multi-two for NAQP SSB. Although the rules allow for
the use of multiple operator names, it appears that N1MM logger will
only put one name in the Cabrillo output. Is this correct? Is it
standard operating procedure for all operators to use the same name?
73, Barry K4CZ
To unsubscribe, send an email to:
N1MMLogger-unsubscribe@yahoogroups.com
Yahoo! Groups Links
To unsubscribe, send an email to:
N1MMLogger-unsubscribe@yahoogroups.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/N1MMLogger/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/N1MMLogger/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:N1MMLogger-digest@yahoogroups.com
mailto:N1MMLogger-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
N1MMLogger-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/