CQ-Contest
[Top] [All Lists]

[TowerTalk] Yaesu G-450A rotor troubles

To: towertalk@contesting.com
Subject: [TowerTalk] Yaesu G-450A rotor troubles
From: KI9A@aol.com
Date: Sat, 17 Jan 2009 12:10:27 EST
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Gang-
 
I am on my 2nd Yaesu 450a rotor, in the past 4 years. The rotor is fine,  the 
control box has issues. Here is what I see:
 
Indicator seems to work fine, going from due south, clockwise, until it  gets 
about 300 degrees. then it seems to stumble, and, stops at 90 degrees  east.  
The rotor rotates the whole 360.  The problem isn't  with the rotor, as I 
have 2 rotors, and both act the exact same.
 
Could it be the pot in the box, or the little motor that drives the  
indicator needle?  I would guess I'm not the only one who has had this  issue, 
any 
comments, or ideas?
 
Thanks
 
73- Chuck KI9A
**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100000075x1215855013x1201028747/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=De
cemailfooterNO62)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>