CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] RBN feed for a single source skimmer under HRD

To: Jeff Blaine <jeff@ac0c.com>, Dave Lindsley <dave.lindsley@gmail.com>
Subject: Re: [CQ-Contest] RBN feed for a single source skimmer under HRD
From: Pete Smith N4ZR <n4zr@contesting.com>
Date: Fri, 03 Jan 2014 15:27:16 -0500
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
Guys, this will not work. CC User does not support the AR Cluster V6 commands. I'd be happy to work with you on this Jeff, because I have been there in spaces - with both VE7CC, CCUser, ARCluster V6 and the AR Cluster client, so let's not burn bandwidth on CQContest.

73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.

On 1/2/2014 9:29 PM, Jeff Blaine wrote:
Dave,

Thanks for the suggestion.  Do you recall what the VE7CC command to filter a 
specific spot source?

I don’t see a filter option in the VE7CC client - or on the web site beyond the 
sh/bydx command (but that’s not a filter).

73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie



From: Dave Lindsley
Sent: Thursday, January 02, 2014 5:03 PM
To: Jeff Blaine
Cc: cq-contest@contesting.com
Subject: Re: [CQ-Contest] RBN feed for a single source skimmer under HRD

RBN is an AR cluster, and I believe you can set a default filter for yourself 
once logged in, that will be retained with your profile for everytime you 
login.  I'm not positive.  Filter details here:
http://www.ab5k.net/ArcDocsVer6/UserManual/ArcDx.htm#SetDxFilter

I use VE7CC Cluster software where I filter, then minmize,  but then set my 
client (HRD) to connect to the built in Telent port of VE7CC software, at 
localhost:7300 - This yields some very granular control.



On Thu, Jan 2, 2014 at 3:56 PM, Jeff Blaine <jeff@ac0c.com> wrote:

   Is there a way to specify a single source skimmer in your RBN feed without 
using a smart telnet application?

   Some of the local guys are using HRD and as far as I can tell, the client in 
that program does not have a filter capability to filter for a given spotter in 
the feed.

   I know you can tell some of the cluster nodes like CC or AR to give you the single 
feed, but I don’t know if that can be done within HRD.

   If anyone has any simple instructions on that, they would appreciate it.  
Thanks!

   73/jeff/ac0c
   www.ac0c.com
   alpha-charlie-zero-charlie

   _______________________________________________
   CQ-Contest mailing list
   CQ-Contest@contesting.com
   http://lists.contesting.com/mailman/listinfo/cq-contest

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest


_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>