Jim,
Good stuff, thanks!
I also recommend K3NA's article on adjusting SSB audio chain. While
specific to Orion, the principles are adaptable any any rig.
http://www.k3na.org/articles/Transmit%20audio%20adjustment.pdf
73, Dave K3ZJ
On Sun, Sep 7, 2014 at 1:13 PM, Jim Brown <k9yc@audiosystemsgroup.com>
wrote:
> Over the last decade or so, Rob Sherwood's extensive work on receiver
> performance has done much to improve the receivers in modern rigs, but
> transmitters have been sadly neglected.
>
> A month or so ago I began work on a project to compare ARRL test data for
> selected rigs, focusing on the trash they generate. I shared an early
> version of that work on the Elecraft reflector, and it seems to have found
> it's way to Yaesu, who has just put new firmware on their website to
> improve the CW waveform.
>
> I've done a lot of work on the piece since then, and it's near its final
> form. If you're thinking about buying a new rig, it should give lots of
> food for thought.
>
> http://k9yc.com/TXNoise.pdf
>
> Also, if you haven't already done so, see the slides for K6XX's excellent
> presentation on Signal Cleanliness, which, among other things, shows how we
> can set up and operate our existing rigs to produce a cleaner signal.
>
> k9yc.com/K6XXAmpTalk.pdf
>
> 73, Jim K9YC
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|