CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] DX Doubler and cabling with FT5000/3000?

To: cq-contest@contesting.com
Subject: Re: [CQ-Contest] DX Doubler and cabling with FT5000/3000?
From: Pete Smith N4ZR <n4zr@contesting.com>
Date: Tue, 18 Oct 2016 07:55:55 -0400
List-post: <cq-contest@contesting.com">mailto:cq-contest@contesting.com>
I believe that the SO2RXLAT now supports the OTRSP protocol.

73, Pete N4ZR
Download the new N1MM Logger+ at
<http://N1MM.hamdocs.com>. Check
out the Reverse Beacon Network at
<http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.

On 10/17/2016 1:36 PM, David Pruett wrote:
I have a DXDoubler with a PIEXX SO2RXLAT and it works perfectly. The only thing necessary is that your logging software must support the MicroHam SO2R protocols over USB to control the SO2RXLAT (which then controls the DXDoubler).

On 10/17/2016 12:24 PM, Kelly Taylor wrote:
If you have the DXD working with a computer and a Yaesu radio now, it should work fine as is: I’m relatively confident Yaesu has been consistent with the microphone pin-outs.

But if your computer, as with many modern computers, lacks an LPT port, you’ll need an LPT emulator such as the SO2Rxlat from Piexx. It’s a USB to LPT translator.

Top Ten specifies the SO2Rxlat as a suitable interface.

73, kelly, ve4xt,

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
<Prev in Thread] Current Thread [Next in Thread>