I remember opening up one of these a loooong time ago. It just takes a can
opener. Then you can solder it back together. As a kid I was given one that
didn’t work so I had nothing to lose. It wasn’t pretty afterwards but I did
manage to fix it.
Ken K6MR
From: Larry K7SV<mailto:k7sv@comcast.net>
Sent: Friday, October 21, 2016 19:41
To: cq-contest@contesting.com<mailto:cq-contest@contesting.com>
Subject: [CQ-Contest] CLEANING CONTACTS IN B&W AND WATERS COXIAL SWITCHES
I’m still using two six position coaxial switches in the shack. Both are rotary
with 7 connectors on the back. One is a B&W Protax model 375 and the other is a
Waters model 335. The design of the two appears to be identical.
Both switches have been showing signs of dirty contacts, especially the 335.
There’s no way to open these switches up to expose the switch contacts. I
finally determined that if one removes the three screws that hold the face
plate, contact cleaner could be sprayed in the holes for the screws. Ultimately
I sprayed enough contact cleaner in one of the holes so I could hear is
slushing around inside. Then as I shook the unit in various directions I kept
turning the switch. I did this enough to ensure that contact cleaner was on all
sets of contacts as I rotated the switch.
Once I figured I’d done that enough, I turned the switch so the front with the
three holes was facing down and shook it up and down to remove the excess
contact cleaner. I used CRC QD Contact Cleaner which is quick drying and leaves
no residue. I picked the product up at Lowes home improvement.
The switches are back in place and each click of both switches results in an
immediate solid contact.
73 de Lar K7SV
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|