CT-User
[Top] [All Lists]

[ct-user] CT, Com Ports, IRQ's and headaches

To: <ct-user@contesting.com>
Subject: [ct-user] CT, Com Ports, IRQ's and headaches
From: Ben Bond" <bbond@global2000.net (Ben Bond)
Date: Fri, 28 Mar 1997 19:18:38 -0500
Put each port on it's own IRQ. Sharing is a nightmare...

Ben   W2PS

----------
> From: Alfred J. Frugoli <ke1fo@contesting.com>
> To: CT-User Reflector <ct-user@ve7tcp.ampr.org>
> Subject: [ct-user] CT, Com Ports, IRQ's and headaches
To: <ct-user@contesting.com>
> Date: Friday, March 28, 1997 10:24 AM
> 
> I'm trying to get CT set up using 4 com ports (2 are new).  I never had 
> any problems running with just 2, but more computer control stuff euqals 
> more com ports.  Base addresses are standard, and com 1&3 are IRQ 4 (I 
> think) and com 2&4 are IRQ 3 (at any rate, the com ports share irq's).  
> The comtsr programs are set up to show the proper IRQ's and base 
> addresses, but when I try to use the two com ports that share an IRQ, 
> neither device works properly.  Do I need to configure for individual 
> IRQ's?  The software interrupts on the comtsr programs are all different 
> for the 4 com ports.  
> 
> Thoughts? suggestions?  I'm going to be putting together a 486 over the 
> summer, and will start off right with an 8 port board!  Thanks.
> -- 
> Al, KE1FO, ex. KE6BER    mailto:ke1fo@contesting.com or ke6ber@tiac.net
> Check out my web page, http://www.tiac.net/users/ke6ber for summaries 
> from the contest reflector and a growing list of amateur radio links.
> 
> --
> Submissions:              ct-user@ve7tcp.ampr.org
> Administrative requests:  ct-user-REQUEST@ve7tcp.ampr.org
> WWW:                      http://www.ve7tcp.ampr.org/Software/ct
> Questions:                owner-ct-user@ve7tcp.ampr.org

--
Submissions:              ct-user@ve7tcp.ampr.org
Administrative requests:  ct-user-REQUEST@ve7tcp.ampr.org
WWW:                      http://www.ve7tcp.ampr.org/Software/ct
Questions:                owner-ct-user@ve7tcp.ampr.org

<Prev in Thread] Current Thread [Next in Thread>