CT-User
[Top] [All Lists]

[ct-user] drivers

To: <ct-user@contesting.com>
Subject: [ct-user] drivers
From: RNotarius@chester-engineers.com (Ron Notarius) (Ron Notarius)
Date: Wed, 13 Jan 1999 12:55:06 -0500
     1.  What type of network connector do the cards have, ie, 
     BNC, AUI, RJ-11, RJ-45, Token Ring?
     
     2.  Are there any other markings on the card itself to 
     indicate a model number, speed, or type?
     
     3.  Can you find out anything about the type of network that 
     these cards came from?  Specificaly, was it ARCNet, 
     EtherNet, Token Ring, DECnet, or something else?
     
     4.  What OS are you planning to use with these machines?  
     Win 95 should automatically detect a standard card, and I 
     think Windows for Workgroups 3.11 will also.
     
     73, ron wn3vaw
     it snows, it snows, it's off to shovel i go...


______________________________ Reply Separator _________________________________
Subject: [ct-user] drivers
Author:  "Gilmer; Mike" <mgilmer@gnlp.com> at Internet
To: <ct-user@contesting.com>
Date:    01/13/1999 12:57


     
I have several used Compaq 486-level PCs (Presario 486/33 model 3060) 
that have network cards installed (that say DIGITAL on them).  The hard 
disks were erased clean (by the company who used to owned them I 
presume) so there are no drivers for the network cards.  The Compaq web 
site (includes Digital?) seems to have nothing.  Is there any kind of 
generic driver for these things that's good enough for CT?
     
Thanks
Mike N2MG
mgilmer@gnlp.com
     
--
Submissions:              ct-user@contesting.com 
Administrative requests:  ct-user-REQUEST@contesting.com 
WWW:                      http://www.contesting.com/ct/ 
Questions:                owner-ct-user@contesting.com
     

--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com


<Prev in Thread] Current Thread [Next in Thread>