CT-User
[Top] [All Lists]

[ct-user] LPT: -> Voice Keyer

To: <ct-user@contesting.com>
Subject: [ct-user] LPT: -> Voice Keyer
From: Mike Walker <mwalker@Legato.COM> (Mike Walker)
Date: Mon, 01 Mar 1999 12:55:31 -0500
Rick

Don't try it with the DVP TSR.  That TSR is only for the DVP voice card.

You shouldn't have to do anything  other than tell CT that the DVP is on LPT1.  
I think it is setup just as you create a new contest/log.

Mike VA3MW


At 12:37 PM 3/1/99 , Rick Mintz wrote:
>
>Hi.
>
>I am trying to get my 486/66 running CT 9.10a to talk to an outboard voice
>keyer (MFJ-432) thru the LPT1 port.
>The port address shown for LPT1 is 0378h and I can't get the DVP to key.
>The DVP TSR requires 0300h or 0308h for LPT1. Tried entering the usable
>addresses (0300h or 0308h) that CT likes into the windows control panel,
>but it will not accept these.
>
>How can I change the LPT1 address to that which DVPTSR will accept. Am
>running CT under DOS.
>
>Thanks......
>
>Rick Mintz, W1TY
>Rochester (NY) DX Association
>Rmintz@Frontiernet.net  or  W1TY@arrl.net
>
>
>--
>Submissions:              ct-user@contesting.com
>Administrative requests:  ct-user-REQUEST@contesting.com
>WWW:                      http://www.contesting.com/ct/
>Questions:                owner-ct-user@contesting.com
>


--
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
WWW:                      http://www.contesting.com/ct/
Questions:                owner-ct-user@contesting.com


<Prev in Thread] Current Thread [Next in Thread>