I retried 946b......first re-booting into dos 6.22 as you kindly reminded me to
do. Now it seems to work just fine so far. Before I just shut down the log,
swapped exe files and re-ran the bat file for the same contest log. Obviously
that wasn't enuf to get me off to a clean start. The re-boot seemed to cure the
"problem" I noticed.
Thanks much.
PS Ken, sorry for the false alarm.
73,
Bruce
=============================
At 01:28 PM 10/26/99 +0000, you wrote:
>Bruce,
>
>Hmm.. Tried this again with TS850 and version
>9.46.002 and it picks up the frequency just fine.
>It even works fine when the station is split
>(phone or CW). The code is even smart enough to
>know if you are in a CW contest that the rigs mode
>should be changed if the rig is in the SSB mode.
>
>Recheck your setup. Perhaps reboot machine first.
>
>73 de Brian/K3KO
>
>
>Bruce Lallathin wrote:
>>
>> Just tried 946b. Set up same as when using 945. Now, getting spots out of
>> announce window with ctrl rt arrow enter sequence does not move the radio
>> to the spot freq but does put the call in the log field ok.
>>
>> Going back to 945 for the contest.
>>
>> Oh, radio is TS-950SD.
>> 73,
>> Bruce
>> AA8U
>>
>> --
>> Submissions: ct-user@contesting.com
>> Administrative requests: ct-user-REQUEST@contesting.com
>> WWW: http://www.k1ea.com/
>> Questions: owner-ct-user@contesting.com
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.k1ea.com/
Questions: owner-ct-user@contesting.com
|