V9.45
Pentium 100 - 8 M
Windows 95 Dos (not under Windows)
Mouse Port com 1
TNC com 3
Kenwood TS-850 com 2 & IF-232C
Nettsr
DVP
Nettsr was loaded separately. We kept having random hangs on this machine. We
tried to isolate it by disabling one thing at time (except the network Nettsr).
We thought that it may be the radio, or the mouse, or the TNC, but no luck.
The network card was a 3Com 3C509. All the com ports have their own IRQ.
Com cords have RF beads on them. We even added snap on chokes. Strange as
well for the M/S that we just ran where it would run for hours, and then have
it fail twice in 10 minutes.
We had thought that it was the hardware, as we had this problem before, so we
built up a new system and had some more of the same problems. Once I thought
that I saw a 'Network received bad checksum' on one of the other machines
before this one hung. That has to be the first time I have seen a message like
that since getting off the serial cards.
The hang is a hard one requiring a power off, or a reset switch. Has anyone
else seen this? We have seen similar problems with 9.27 and 9.39. The gut
feel is that it is related to the network some how or to the DVP. The software
interrupt for the packet driver is 0x6F to avoid DVP conflicts.
Comments welcome.
Mike
=================================================
Mike Walker VA3MW
Corbeil Contest Club
http://www.qrz.com/wrad/directory.cgi?VA3MW
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.k1ea.com/
Questions: owner-ct-user@contesting.com
|