CT-User
[Top] [All Lists]

[ct-user] packet problem with 9.51

To: <ct-user@contesting.com>
Subject: [ct-user] packet problem with 9.51
From: AA4NC@aol.com (AA4NC@aol.com)
Date: Fri, 27 Oct 2000 09:32:26 EDT
I installed 9.51 - everything is ok except for packet. I get lots of garbage 
characters in the packet window. I have tried every combination of 
bits/parity to no avail. The garbage bits I'm getting are not the usual ASCII 
stuff that shows up when you have the baud settings wrong. It seems to be 
extra letters and letters substituted for others. It's almost readable in 
other words - maybe 25% of the letters are bad, so it seems to be close, but 
no cigar.

The TNC/ packet setup works fine under Windows Hyperterminal using same 
cabling/COM port/settings. It has worked fine with CT until now. It's a PK232 
TNC. 

Any suggestions?

Tnx,

Will

--
WWW:                      http://www.k1ea.com/
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
Problems:                 owner-ct-user@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [ct-user] packet problem with 9.51, AA4NC@aol.com <=