CT-User
[Top] [All Lists]

Re: [ct-user] Interworking Win CT & DOS CT on a loop network

To: <ct-user@contesting.com>
Subject: Re: [ct-user] Interworking Win CT & DOS CT on a loop network
From: "Andy Cook, G4PIQ" <g4piq@btinternet.com>
Date: Tue, 2 Dec 2003 07:52:32 -0000
List-post: <mailto:ct-user@contesting.com>
I asked about this before going to 5U for the contest and never got a chance
to post on the response to the lst that a few folks asked for, but as you'll
see below, Ken told me that CT Win does work fine in -loop mode. I can
confirm that - we ran one laptop this year with Win CT and the rest with DOS
CT on a loop network and all was well with the world!

Thanks everyone for the QSOs from 5U5Z.

73,

Andy, G4PIQ.

-----Original Message-----
From: Ken Wolff [mailto:ken@k1ea.com]
Sent: 17 November 2003 22:19
To: Andy Cook, G4PIQ
Subject: Re: [ct-user] Interworking Win CT & DOS CT on a loop network


Andy,

CtWin works fine in -loop mode. I took an XP laptop to HC8N last year and
that is what we used to tie packet into the network. Just create a shortcut
to start CT and add the appropriate switched to the program line. For
example:

"C:\Program Files\K1EA Software\CtWin\ctwin.exe" cqww  -vga -loop

If you use Win CT you can select telnet as the packet connection and connect
to your favorite cluster. NT networking can use Ethernet or a serial port,
depending on your hardware.

73, Ken

> ------------Original Message------------
> From: "Andy Cook, G4PIQ" <g4piq@btinternet.com>
> To: <ct-user@contesting.com>
> Date: Mon, Nov-17-2003 10:41 AM
> Subject: [ct-user] Interworking Win CT & DOS CT on a loop network
>
> Off to 5U5Z in a week and it crawls out the woodwork that one of the
> laptops that is available this year is Windows 2000 only. Does anyone
> have any experience of interworking Win CT and DOS CT via a serial port
> loop network - I have a feeling that Win CT doesn't support -loop - can
> anyone confirm or deny  - I'm not sure how you'd tell it to start in
> loop mode anyhow . I've also tried interworking Ethernet with NETTSR
> with a loop network in the past and that didn't work either. Any
> suggestions?
>
> 73,
>
> Andy, G4PIQ
>
>
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/ct-user
> CT on the web:  http://www.k1ea.com/
>
>



_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [ct-user] Interworking Win CT & DOS CT on a loop network, Andy Cook, G4PIQ <=