John Bednar wrote:
>Did anyone have problems with the latest version of CTWin when
>trying to return to the Run frequency with ALT-F4? I marked the run
>frequency with ALT-F5 and I even tried to type the frequency on the
>callsign line. That seemed to help once but it wasn't repeatable.
>
>I had problems on three stations during ARRL CW. They all used the
>same version of CTWin and the same keymap file. I just looked at the
>hex values in the keymap file and there was no error in the file.
>
>I just thought I'd check with the group before I dig deeper.
>
>John
>k3ct@verizon.net
>
>
>
>
>_______________________________________________
>CT-User mailing list
>CT-User@contesting.com
>http://lists.contesting.com/mailman/listinfo/ct-user
>CT on the web: http://www.k1ea.com/
>
>
>
>
The video driver on one of my machines intercepts ALT-F5 before it ever
gets to the program, so ALT-F5 doesn't work. During the ARRL CW I
sometimes forgot and started a new run frequency without returning from
a spot. Usually this happened after chasing a spot to another band,
then dialing around to settle in. If I did this and chased a new spot,
on return I would be on the wrong band. After I figured out what was
going on, I got used to saving the new run freq in a second VFO in case
I was "sent to the twilight zone" on return. I would just load VFO A
from VFO B and life was good again.
- Ken
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web: http://www.k1ea.com/
|