CT-User
[Top] [All Lists]

Re: [ct-user] Bandmap not Working with CTDOS in WIN 95 Laptop

To: k1ep.list@gmail.com
Subject: Re: [ct-user] Bandmap not Working with CTDOS in WIN 95 Laptop
From: "Dennis Vernacchia" <n6ki73@gmail.com>
Date: Fri, 5 Dec 2008 10:51:35 -0800
List-post: <ct-user@contesting.com">mailto:ct-user@contesting.com>
The -VGA command did not resolve the issue

every sub window was resized and no bandmap appears
using alt comma command

K6AM thinks I may need an external keyboard and the laptop keyboard
could be an issue

I don't have the port replicator unit right now, that has the PS2 port for
keyboard

anyone think it's a internal vs external keyboard issue ?



On Fri, Dec 5, 2008 at 4:00 AM, Ed K1EP <k1ep.list@gmail.com> wrote:

> At 12/5/2008 05:13 AM, you wrote:
>
>> I forgot to mention I am using External 15 inch flat screen monitor so
>> I don't believe that is the issue....
>>
>
> Doesn't matter.  What is the resolution of the DOS shell?  Doesn't hurt to
> try the -RESET on the command line.
>
>  On Fri, Dec 5, 2008 at 1:48 AM, Ed K1EP <<mailto:k1ep.list@gmail.com>
>> k1ep.list@gmail.com> wrote:
>> It might have to do with screen size.  THe bandmap may be off screen.
>>  There is a command line -RESET that will reset all windows to 800x600.
>>
>>
>> At 12/5/2008 03:52 AM, Dennis Vernacchia wrote:
>> I acquired a neat little Toshiba Libretto CT50 Mini Laptop
>> that has WIN95 OS on it
>>
>> I tried 2 versions of CTDOS   Ver 10.03.002  & 10.04.001
>> both of which I have used on 2 other DOS computers and had no issues with
>> Bandmap Window
>>
>> I boot directly into DOS on all these machines using F8 on boot up so I
>> am not loading any windows drivers - Laptop goes staright to DOS window
>>
>> My other 2 computers are  running WIN98 and Bandmap works fine
>> when I boot straight into DOS.
>>
>> With this Toshiba Libretto CT50, I am using COM1 for radio control and
>> all other control functions work fine, ie, if i type in a freq in callsign
>> field
>> radio QSYs fine and also radio changes mode for mixed mode contests when I
>> hit Ctrl F1 or F2
>> so I know the Libretto sees the radio
>>
>> With the Libretto Laptop, when I type Alt , ( Alt - Comma ) the Bandmap
>> window does not appear
>>
>> I am sure I have run CTDOS in past from a WIN95 OS machine and Bandmap etc
>> worked fine.
>>
>> I tried my Kenwood TS-850 and my K3 and running straight from DOS on
>> bootup
>> ( No Windows Drivers loaded )
>> I typed COMTSR1 -B4800 which has controlled both these radios in the past
>> on
>> my 2 other
>> computers
>>
>> Anyone run into this where laptop controls radio but bandmap won't work ?
>>
>> Is this some weird issue because I am using the Libretto Mini Laptop ???
>> I come out of DB-9 COM 1 port of the laptop with a W1GEE RS-232  interface
>> when running the TS-850 and use a straight 9 pin serial cable with the K3
>> as
>>
>> K3 has interface built in.
>>
>> Any ideas on this propblem ? Does WIN95 have some issues on certain
>> computers when running CTDOS ?
>>
>> 73, Dennis N6KI
>> _______________________________________________
>> CT-User mailing list
>> <mailto:CT-User@contesting.com>CT-User@contesting.com
>> http://lists.contesting.com/mailman/listinfo/ct-user
>> CT on the web:  <http://www.k1ea.com/>http://www.k1ea.com/
>>
>>
>>
>
_______________________________________________
CT-User mailing list
CT-User@contesting.com
http://lists.contesting.com/mailman/listinfo/ct-user
CT on the web:  http://www.k1ea.com/

<Prev in Thread] Current Thread [Next in Thread>