JIM, JUST HIT ENTER AND IT WILL GO TO THE # COLUMN. BUT I MUST SAY THAT
I ALSO WONDER WHY. ???
> After participating in the Sweepstakes this weekend with v.25, I have
> the following question:
> The logging field is layed out:
> Serial # Precedence Call Check Section
> However, the exchange invariably gets sent in the following order:
> Call Serial# Precedence Check Section
> That is, if you are cqing, then you will hear and enter the calling
> station's callsign first thing. Then you send your info starting with the
> serial #. Then copy the calling station's info, which always starts with
> the serial #.
> If you are S&Ping, then you will receive the info as in the above
> paragraph, having already filled in the cqing station's callsign in the
> first field. Then you send your info, with the cqing station having
> already filled in your call in the callsign field.
> Am I missing an obvious difference why the field is layed out in a
> different order than it is sent and copied? On every qso that I logged,
> I wished the field was layed out in the order that I was receiving it
> from the contact station. As it was, I had to tab 3 times after copying
> the call to get to the next item received (serial #).
> Thanks Jim W4LC
> Submissions: firstname.lastname@example.org
> Administrative requests: na-user-REQUEST@contesting.com
> WWW: http://www.contesting.com/datom/
> Questions: email@example.com
Administrative requests: na-user-REQUEST@contesting.com