[Top] [All Lists]

[NA-User] TS940SAT

To: <>
Subject: [NA-User] TS940SAT
From: (G3SJJ)
Date: Wed, 13 Nov 2002 22:47:46 -0000
Ray, have you had recent contact with PIEXX?  I ask because a
friend of mine is attempting to sort my TS930 and has discovered
that the problem is on the PIEXX board. He has tried e-mailing but
has received no replies. Likewise another UK station has also been
unable to make contact.

Apologies for the non-NA content but I have been trying to sort this
930 out for nearly 2 years since I got the PIEXX board.

73 Chris G3SJJ
-----Original Message-----
[]On Behalf Of Jessica Benny
Sent: Wednesday, November 13, 2002 4:39 AM
To: Rob Neece
Cc: NA-User List
Subject: Re: [NA-User] TS940SAT


I have two TS940s interfaced to NA that I use for MS or MM operations. I
originally had the IF10B and RS232 interfaces, however, they did not seem to
work as they should, I was not happy with them.

I then purchased the interface made by PIEXX Co. They are great! They have
never failed to bring the radios on line or hiccupped at all. I highly
recommend them.

The Web page for the TS940s interface is: They
have provided good follow up service and are reasonable priced. Call them
first, you have to determine if you have the correct Eprom in your radio to
match their system.



Rob Neece wrote:

> I just acquired W4PRO's old TS940SAT.  (So the rig certainly has more
> contesting and DX experience than I will ever have!)  Anyway, I am just
> getting it set up and would like to get it working with NA.  Previously I
> have only used NA for keying and have not tried rig control.  If some of
> you with experience would like to advise me on interfacing and using the
> 940 with NA, it would be greatly appreciated.
> Rob
> KK4R
> _______________________________________________
> NA-User mailing list

NA-User mailing list

<Prev in Thread] Current Thread [Next in Thread>