I have had this problem too. Sometimes I have been able to make this go away
without rebooting by toggling to the other radio (a TS940) and then back to the
MP. Or by inputting a different band-frequency from the keyboard (but NA likes
to shift to a different mode than the original when I do this) and then
shifting back to the original band.
At 01:08 PM 9/2/05, Ray wrote:
>I have been using NA for general logging lately and one thing that bothers
>me is when I turn off my FT1000MP with NA running, NA says "Radio is Out of
>Contest Bands" when I turn the radio back on. The only way I can always
>clear this is to reboot the computer. The Alt/F1-F2 seldom works, although
>if I press Alt/F1-F2 and CRTL/F1-F2 enough times, I may finally get the
>radio back to the band and mode that I left it on.
>Is there a refresh or re-sync key, or a combination of keystrokes that will
>get NA to see the radio and read the frequency more dependably?
>As a note, when I used NA with the T940S radio with the Piexx interface,
>this was not a problem. Is there something in the 1000MP that could be
>modified to help this situation if NA can't?
>NA-User mailing list
>NA on the web: http://www.datomonline.com/
NA-User mailing list
NA on the web: http://www.datomonline.com/