I don't know if it's just my day to have computer problems but when I
download 1069 it seems to install 1068. No biggie but am I the only one?
----- Original Message -----
From: "David Pruett" <firstname.lastname@example.org>
To: "NA-User Reflector" <email@example.com>
Sent: Friday, January 23, 2009 3:44 PM
Subject: [NA-User] New NA Version 10.69 Available
> 23 JANUARY 2009
> NEW NA RELEASE 10.69 NOW AVAILABLE
> A new version of the NA contest logging program is now available
> from the Radio Bookstore or the DATOM Engineering web site at
> For those who notice such things, the last general release of NA was
> version 10.66 back in March 2008. Since then, there have been a couple of
> limited releases as we worked to debug problems or develop new features.
> 10.69 has been used in several contests from the K8CC station and is quite
> The primary reason for 10.69 is to support rule changes for the CQ 160M
> contest, where DX stations now send their CQ zone in their exchange rather
> than a poorly defined country abbreviation. Prior NA versions can be used
> under these new rules by simply typing in the received zone, but 10.69
> convenience because it inserts the CQ zone automatically for non-domestic
> (W/VWE) stations.
> Changes in Revision 10.69
> * Updated Cabrillo file formatting to revision 3.0, and changed the Log
> File Information screen to more accurately support the Cabrillo descr-
> iptions for entry categories.
> * Revised CQ 160 Contest to default received exchange for DX QSOs to
> CQ zone to support new rules for 2009.
> Changes in Revision 10.68
> * Corrected RS-232 command protocol error with setting radio frequency
> for FT817/857 - (tnx to AK0M for his detective work on this).
> * CW sending would not work correctly in mixed mode with RTTY enabled -
> (tnx K9TM)
> * Band selection window would not allow de-selecting unused bands.
> * In contests with list+DX multipliers, the Alt-M multiplier window
> not show the DX mults.
> * In CQWW, when checking zone-QSOs with F10, QSOs would be shown with
> country of the zone multiplier instead.
> * In CQWW, the QSOs Per Multiplier breakdown for zones were inaccurate
> (tnx N4XM).
> * Fixed crash with the Bandchanges Per Hour breakdown and made the
> breakdown always appear along with the QSOs Per Hour breakdown (used
> to only appear in contests with limits on multi-op bandchanges).
> * Added report in .BRK file for the number of CQs called and the number
> of times stations were called during the contest.
> * Added capability to set the non-active VFO with the minus key on Yaesu
> FT817/857 radios.
> Changes in Revision 10.67
> * When using SO2R, the default RST on the alternate radio would always
> 599 regardless of the mode - fixed (tnx W8MJ).
> * Callsigns with non-standard portables needed to be matched on the full
> callsign to correctly identify the country (example: 9M6/N1UR =
> not East Malaysia) - fixed (tnx K8MP).
> * Added option to send QSO numbers by band-mode, in addition to the
> option to send QSO numbers by band.
> * Reallocated two characters from the end of the "Address2" field on the
> Information Sheet to the "Club" field accomodate the name "Society Of
> Midwest Contesters" per K9MMS's request.
> Current versions of NA and accessory programs:
> NA 10.69
> NAU 1.39
> NAQSL 4.00
> TE 1.18
> CONFIG 1.15
> DATOM Engineering
> Dave Pruett, K8CC
> Tom Pruett, WB8VMN
> NA-User mailing list
> NA on the web: http://www.datomonline.com/
NA-User mailing list
NA on the web: http://www.datomonline.com/