RFI
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [RFI] Ferrite Beads

from [Bob Tellefsen] [Permanent Link][Original]
To: "Ford Peterson" <ford@cmgate.com>,"Jim Smith" <jimsmith@shaw.ca>, <rfi@contesting.com>
Subject: Re: [RFI] Ferrite Beads
From: "Bob Tellefsen" <n6wg@comcast.net>
Date: Thu, 21 Oct 2004 08:25:46 -0700
List-post: <mailto:rfi@contesting.com> 
Ford
If you have one or two toroids to spare, I suggest an experiment.
Take some inductance measurements on the toroids with a few turns of
wire on them.
Now break them as you described.
Put them back together and put the same windings on them again.
Measure and see what difference shows up.
Good luck and 73
Bob N6WG
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [RFI] Ferrite Beads, Ian White, G3SEK
Next by Date:  [RFI] TVI fix?, John Rader
Previous by Thread:  Re: [RFI] Ferrite Beads, Ford Peterson
Next by Thread:  Re: [RFI] Ferrite Beads, Jim Brown
Indexes:  [Date] [Thread] [Top] [All Lists]