I wonder if maybe it is something else entirely. A dozen years ago I had this
sort of RFI on a couple of discrete frequencies in the 80-meter band. I traced
it to a neighbor's house, where we discovered that it was related to an
upstairs bathroom's lights. The odd parts - the lights were ordinary
incandescent, and the interference was only present when the lights were
switched *off* at the wall switch.
I replaced the wall switch - an ordinary 72-cent "silent" (non-mercury) switch
- and that cured the noise. A few weeks later, I discovered another emitter a
little farther away in the development - same source, same cure.
Never did figure out what the mechanism could have been to account for it.
73, Pete N4ZR
At 10:06 PM 3/9/2006, Martin, AA6E wrote:
>Or it could be that one oscillator pulls the other off frequency?
>Maybe the noise is still there, but at another freq.? Most of my
>stuff that generates raspy spurs is very sensitive to line voltage,
>among other things.
>
>A random thought!
>
>73 Martin AA6E
>
>On 3/9/06, doc <kd4e@verizon.net> wrote:
>> Tom Rauch wrote:
>> >> > I turned on a second compact fluourescent light while
>> >> > listening to my shortwave radio, the first caused RFI,
>> >> > the second CANCELLED it!!
>> >> >
>> >> > But the first only caused RFI in the same room as the
>> >> > radio, the one in the other room had no effect on the
>> >> > radio by itself.
>> >
>> > It's very easy obvious what happened when we work through
>> > this.
>> >
>> > 1.) Only one light makes noise, he stated that.
>> >
>> > 2.) The second lamp that does not make noise, when placed
>> > across the power mains, reduced noise from the only RFI
>> > generating lamp.
>> >
>> > The can only be one thing happening. The second lamp is
>> > loading the line and changing something so the power lines
>> > are detuned for noise (so it is a less efficient antenna or
>> > less well coupled to the RFI generating lamp).
>> >
>> > At my old house in Conyers, I had bad noise coming in on the
>> > power mains. The noise was generated in my neighbor's house.
>> > What I did was build a bypass capacitor with two 120VAC
>> > rated .01uF capacitors, each one tied from one side of the
>> > line to the safety ground, into a plug.
>> >
>> > I just moved that plug around to different outlets until I
>> > found one that detuned the power lines, and made the noise
>> > radiating from the lines in my house disappear. The noise
>> > virtually vanished even though I'm positive the source of
>> > noise several hundred feet away still remained.
>> >
>> > It's almost certain a the same thing is happening.
>> >
>> > 73 Tom
>>
>> Tom,
>>
>> You are amazing! Thanks for the answer to a paradox
>> wrapped in a puzzle twisted into a conundrum ... or
>> however that wonderful phrase goes!
>>
>> --
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> Thanks! & 73, doc kd4e
>>
>>
>> |_|___|_|
>> | | & | |
>> {|
>> /\ {|
>> / \ {|
>> / \ {|
>> / @ \ {|
>> | |~_|~~~~|
>> | -| | |
>> ============\ # http://bibleseven.com
>> KD4E =====================================
>> West Central Florida
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
>>
>
>
>--
>martin.ewing@gmail.com
>http://blog.aa6e.net
>_______________________________________________
>RFI mailing list
>RFI@contesting.com
>http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|