How close is the inverted V to the house and TV? This is a pretty low
antenna and it's not directional so you're likely to get alot of RF
coming into the house with it. Regardless, a well designed TV should
be unaffected at least at low power. As a comparison, my 80 dipole
runs right over the top of my shack (and house) with the apex at 50
feet and the ends at about 25 or 30 feet. I can run 1KW with no TVI
to the LCD TV inside the shack, however I get TVI (to the color) on
the TV in my living room while running only 50W. This is clearly a
problem with a poorly designed TV. I advise trying another TV.
Another thing you may want to try is to run the TV off a generator to
eliminate RF conducted through the power line. You should power a VCR
or DVD player off the same generator so no input to the TV is
connected to the AC or long coax lines.
Does your TV have a sub-woofer. Powered sub-woofers are notorious
for RFI problems. If you have them, then you'll almost certainly need
ferrites on the speaker leads. See the K9YC website.
Use a good Balun at the inverted V feedpoint to eliminate RF traveling
down the shield of the coax. See the K9YC website.
On 1/28/08, rrath@charter.net <rrath@charter.net> wrote:
> Several of you have asked me to give more info. Here it is.
>
> I have the Yaesu FT 100, coax (not flat line) and the apex of the inverted V
> is about 40' and both ends are at about 9'. All radio equipment is gounded to
> a 12" long pc of copper pipe under my desk top. I am using 12 gauge
> stranded wire to the copper pipe. I am using 8 gauge solid copper to one 8'
> ground rod about 7' away, then the same pc of 8 gauge wire continues on
> about 5' more to a 4' ground.
>
> I have some TVI with out the amp on. The type of TVI is nothing to the
> picture and blaring distortion on the sound. This is with or with out the VCR
> turned on. The radio output is at 70 watts out.
>
> Now with the amp turned on and running between 300 to 400 watts SSB, the
> sound is just as bad and the picture had very bad horizontal lines.
>
> I have cable TV, no Digital, the TV is about 5 years old, has two built in
> speakers (but I think it is only mono sound - have no control for left or
> right
> on the speakers) and the VCR is less than 1 year old. I am using 75 ohm
> coax for all connections. I use no cable box.
>
> Need more info?
>
> Rod
> ps - K9YC, I am reading your web site. Thank you.
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|