This is very bad advice. A major CAUSE of RFI to auto electrical
systems is lousy chassis bonding due to excessive emphasis on
painting the chassis parts. The body of a vehicle is a big broad
mass -- IF all parts are well bonded together. Resonances and RFI
occurs when it is NOT well bonded.
73,
Jim Brown K9YC
The On Sun, 14 Sep 2008 16:32:01 +0000, Keon wrote:
>I think you have created a ground loop. The thing is, bonding is
good but in bonding you can create resonate length wires and stuff
if you bond too much.
>Worse come to worse, unbond everything and start over. Bond the
doors and hook and check the bands. Then bond a bit more.
>I suspect if you bonded your exhaust and you are driving a big
truck; that is long enough to resonate on 20 so unbond that first.
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|