I would love to put this sub in a bucket of water twice and take it out once,
that is a cure for a lot of these poorly designed consumer RFI problems. I
don't have a big enough bucket!
Contacted Polk Engineering and their initial solution was to install a high
pass filter from the signal input to ground. What ground, there is no shield or
even safety ground on this item.
They also wanted to reproduce the problem in the lab but were hung up over not
having the same model of FRS radio as I had.
I have not been filled with confidence in their "engineering" abilities.
Ed
VE4EAR
----- Original Message -----
From: Bill NY9H <ny9h@arrl.net>
Date: Friday, December 12, 2008 8:35 am
Subject: Re: [RFI] RFI to a Home Theater System
To: Ed Richardson <ed_richardson@shaw.ca>, rfi@contesting.com
>
> My neighbor has a Polk subwoofer
> >Any suggestions or advice on further things to try w
>
>
> HEY BROWN.... tell him about your bucket fix !!!!!!!! :)
>
>
> bill
>
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|