On 3/13/2009 Hardy Landskov wrote:
> Hi Bob and Everyone else,
> Garry, NI6T (Big 160 guy) made a paper study of dimmer switches and put it
> out on the Topband Reflector if I remember. And there is quite a difference!
> I have it around somewhere but emailing Garry might be faster email@example.com
> 73 Hardy N7RT
I have a good friend who works for Lutron, and a while back I emailed him,
asking these very questions. He gave me permission to put his answer up on the
list. I've redacted his name, and "family" news (weddings etc)
>On 11/19/2006 Redacted wrote:
> To paraphrase the racing guys, RFI suppression costs money. How low do you
> want to go?
> There are a couple of factors involved--one is how the device responds to
> noise on the line before we dim, the other is how we do the dimming.
> The best possible solution is made for hospitals and MRI centers--zero RFI.
> Lotsa bucks. The next best solution is our GP dimming panels--very little
> RFI, but lotsa bucks. Then comes our LP dimming panels, with the new
> FET-based A-series dimming module. Much more modestly priced, but this is
> still Lutron. (Depending upon how much the electrical contractor marks it
> up, you're still probably around a hundred dollars per circuit or so.)
> Want more? Here's the Lutron FAQ for RFI:
> Note the last suggestion--install an electronic low-voltage lighting
> system, with an ELV dimmer. Then comes the big tip: a separate neutral.
> Lots of times these days electricians will wire a building with a common
> neutral--combining the white wires and running a lot of circuits back to
> the panel on a single white wire. This is a bad thing to do--because you
> get all kinds of nasty noise on the line, and the noise appears on all of
> the circuits. But it happens (it saves the contractor wire).
73 de KG2V
For the Children - RKBA!
Be wary of strong drink.
It can make you shoot at tax collectors -- and miss.
RFI mailing list