How do you know the voltage on the high lines? I have big lines running
through my property in the country and know they are way above 14.4 or
anything near that but how can you tell?
73, de Jim KG0KP
----- Original Message -----
From: <k9mk@flash.net>
To: "AE5B" <ae5b@arrl.net>; "RFI Reflector" <RFI@Contesting.com>
Sent: Tuesday, October 13, 2009 3:46 PM
Subject: Re: [RFI] HV Transmission Line
> John,
>
> I have a 345Kv line about a mile west of me. The high lines are dead
> quiet when compared to the noise coming from the 14.4Kv distribution plant
> that feeds our community.
>
> Mike K9MK
>
> -------------- Original message from AE5B <ae5b@arrl.net>: --------------
>
>
>> Lot of windmill power in West Texas. Lot of customers in East Texas. As a
>> result, 300 miles of 345 kV transmission lines will soon be built through
>> my
>> area. Two of the four proposed routes will cross portions of my ranch.
>> One
>> proposal would have a line running approximately a mile from the ranch
>> house. Is
>> that far enough away that I shouldn't worry?
>>
>> John
>> AE5B
>>
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|