[Top] [All Lists]

[RFI] Whirlpool 465 Oven Door Latch Solenoid RFI

To: "RFI Reflector" <rfi@contesting.com>
Subject: [RFI] Whirlpool 465 Oven Door Latch Solenoid RFI
From: "Ward Silver" <hwardsil@gmail.com>
Reply-to: Ward Silver <hwardsil@gmail.com>
Date: Sat, 9 Jan 2010 17:12:57 -0600
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
Hi all,

Strong RF from a low dipole is triggering the door latch solenoid on a 
Whirlpool 465 gas oven.  I installed an ac line filter but that didn't change 
anything.  I have a training manual that shows the wiring for the solenoid and 
the next step will likely be adding ferrite corres to the controller followed 
by adding an on-off switch to the solenoid since it's only activated during the 
self-cleaning cycle. However, if anybody has cured a similar problem, I would 
be interested in hearing how you did it.

73, Ward N0AX
RFI mailing list

<Prev in Thread] Current Thread [Next in Thread>