On 2/26/2011 4:29 PM, ka4rur@gmail.com wrote:
> 3. Any suggestions?
You didn't say what ferrite core material you're using or how many turns.
It takes more turns for 160 than for 80 and above, and #31 material
works much better than #43 or #61. I'd try to get at least 14 turns,
and more is better. If you've already done that much, with #31 material,
add a second choke in series.
The best place for the choke(s) is as close as practical to the U-Verse
box that is receiving the signal. A choke is unlikely to do much good
in/near a telephone splice box. It's the electronics that detects the
RF, and that's where the choke should be.
73, Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|