Dear friend David
I use the Drake TV-1000 and I built several filters that I found Web,
regrettably with
none could eliminate the ITV in the Channel 2 when I transmit in 20, 10 and
6mtrs.
My opinion is that any form doesn't exist of eliminating ITV for harmonic in
the channel 2.
If somebody says the opposite that demonstrates it to me with facts....
hihihihi.
Strong hug. 73.-
Eduardo. CO8LY
Santiago de Cuba .- Cuba
----- Original Message -----
From: <doc@kd4e.com>
To: "RFI List" <rfi@contesting.com>
Sent: Monday, April 04, 2011 12:35 PM
Subject: [RFI] Which filter to use?
Has anyone swept these filters?
I'm considering their use on the output of a broadband 1.5KW
PEP/750W CW 160-6M solid state amp to knock-down harmonics.
Drake TV-1000-LP 30MHz 1KW (17, 15, 12M)
Nye Viking Model 020-001 (10M, 6M)
[HF Low Pass Filter. Rated at 3 KW continuous, all mode,
5 KW peak. FLAT, low loss, passband and stopband with over
65dB attenuation above 57 MHz.]
Or, are there specific alternative products you can recommend
for this application, please?
Thanks!
--
Thanks! & 73, KD4E
David Colburn http://kd4e.com
SE-GA Tailgate - April 9th, 2011
Have an http://ultrafidian.com day
I don't google I SEARCH! http://ixquick.com
Shop Freedom-Friendly http://kd4e.com/of.html
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|