On 12/24/2012 11:46 AM, Jim Brown wrote:
On 12/24/2012 8:29 AM, Steve wrote:
The big-box stores only carry the electronic ballasts. Wonder if the
electronic ballast will cause me problems?
Expect them to be noisy. Noise is radiated (at least) three ways --
from the tubes themselves,
I have 11 2 tube, 8' fixtures. They have the big black inductive
ballasts. No noise from tubes or wiring. That's 1650 watts and no
noise with no shielding. Purchased them from Lowe's.
However due to our "nanny state" feds I understand the 8 footers may
soon be made of unobtanium.
I used to buy the full spectrum versions 2 cases at a time and replace
them all at one time.
73 Roger (K8RI)
from wiring between the controller and the
tube(s), and from power wiring. I've seen advice from the EMC community
that it's possible to shield the fixture with screen wire to kill the
wiring from the tube, and radiation from power wiring can be killed with
a good common mode choke, using the measured data of Appendix One of my
RFI tutorial as winding guidelines.
http://audiosystemsgroup.com/RFI-Ham.pdf
73, Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|