How odd that you just asked this question. I am putting together a bulk
order for our club, and literately just sent the email off less than 5
minutes ago. Here is a cut from it...
===CUT===
Type: RG-8X, Split Core
Part#: 431164281
Qty: 1, $2.13
Qty: 10, $1.81
Qty: 50, $1.48
Type: RG-8, Split core
Part#: 431167281
Qty: 1, $2.64
Qty:10, $2.33
Qty:50, $1.80
Type: Small Power, Split core
Part#: 431178181
Qty: 1, $1.71
Qty: 10:$1.49
Qty: 50:$1.38
Type: RG-8x, Solid Core
Part#: 2631540202
Qty: 1, $0.92
Qty: 50, $0.82
Note: You MUST put these on BEFORE the connector goes on.
Type: FT250-31
Part#: 2631803802
Qty 1: $6.94
===CUT===
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Sat, 2014-06-14 at 11:11 -0300, Jorge Diez - CX6VM wrote:
> Hello
>
>
>
> Anyone that can give me a MOUSER.COM part number for good clamp on ferrites
> for cables like keyboard, mousse, USB cables, RS232 cables, RCA to RCA
> cables
>
>
>
> Need something that open, I can do 3-4 turns with the cable and then I can
> close it. Connectors will not go through the hole so I need something that
> can be opened, I think clamp on is the right word for this type, right?
>
>
>
> Thanks in advance
>
>
>
> 73,
>
> Jorge
>
> CX6VM/CW5W
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|