RFI
[Top] [All Lists]

Re: [RFI] RF getting into 4-port wirelss router.

To: RfI@contesting.com
Subject: Re: [RFI] RF getting into 4-port wirelss router.
From: Jeff <jrnet@centurylink.net>
Date: Mon, 12 Jan 2015 12:40:30 -0600
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
I changed TV & Internet providers from a coax feed line to cat5 feed line
from the point of entry at the house to the modem inside.

My tower that I load for 160m is 20 feet from the entrance point. Every time
I transmitted, 1kw on 160m, my tv would go down along with the internet.
It would reset a minute later.  I never had a problem when the feed was coax.

I read K9YC's 'Understanding and Eliminating RF Interference' guide and added a
15 turn Ferrite choke right at the point of entry into the modem. I have 
multiple
cat5 cables going to other computers from there.  It completely solved the 
problem
and the tv has no interference & internet is always on. Thanks Jim.

Jeff Reynolds  NE0DX

Kenneth G. Gordon wrote:
OK, gang, I need some different help here.

I have a 4 port wireless router (Trendnet TEW-812DRU at the moment)
connected to our main computer and two others in the home, not including
the laptops that connect to it periodically.

I have replaced the router at least 4 times over the past year or two due to
the fact that RF from my ham station is getting into it through one or more of
the three CAT-5 cables I have connected to it.

I have installed several of those snap-on filters on all three of the CAT-5
cables which connect to it, and also on both ends of the DC power cable,
making seveal "loops" through each filter.

I still wipe out the router every time I get on the air. I have destroyed one
$169.00 router, and two less expensive ones, a TPNET and a Cisco.

The only solution I have come up with is to disconnect the CAT-5 cables (all
three of them) from the router each time I get on the air.

Has anyone here had a similar problem, and if so, what did you do to fix it?

BTW, one of my CAT-5 cables runs to the ham shack, where it connects to a
dumb 4 port switch...

This has become a giant PITA.

Any ideas?

Kenneth G. Gordon W7EKB

"Courage is being scared to death but saddling up anyway."--- John   Wayne

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>