The cores that came apart were not snap-ons. They were solid cores.
N2TK, Tony
-----Original Message-----
From: Charles Coldwell [mailto:coldwell@gmail.com]
Sent: Monday, June 19, 2017 7:44 AM
To: N2TK, Tony <tony.kaz@verizon.net>
Cc: RFI RFI <rfi@contesting.com>
Subject: Re: [RFI] Snap-on Ferrites
Could this have something to do with the unavoidable gap in the
high-permeability material in a snap-on ferrite? The majority of the MMF is
usually in the air gap.
On Mon, Jun 19, 2017 at 6:47 AM, N2TK, Tony <tony.kaz@verizon.net> wrote:
> Here in upstate NY I have Fair-Rite FT-240 #31 cores on my RG6 receive
> antennas - 8 turns. This spring when I did an inspection I saw that
> several cores had split or had chunks out of them. Do the cores need
> to be protected from the weather? I replaced the broken cores with the
> biggest clamp-on, #0431177081, #31 ferrite with 8 turns. They are just lying
> on the ground.
> Should I enclose them?
>
> I made up four 3/4 wave length RG6 lines for my 80M 4-square. I used
> the same biggest clamp-on ferrite with 8 turns at the feedpoint.
> Should I do anything additional such as tie wrap them and/or enclose the
> ferrite?
>
> 73,
> N2TK, Tony
>
> -----Original Message-----
> From: RFI [mailto:rfi-bounces@contesting.com] On Behalf Of Ed K0iL
> Sent: Sunday, June 18, 2017 11:20 PM
> To: john@kk9a.com; rfi@contesting.com
> Subject: Re: [RFI] Snap-on Ferrites
>
> John,
>
> Seems we can always get more turns around a toroid ferrite (several)
> than you can on a snap on ferrite (maybe one). This would make
> snap-ons less effective than a toroid core based on number of turns.
>
> 73, de ed -K0iL
>
> -----Original Message-----
> From: RFI [mailto:rfi-bounces@contesting.com] On Behalf Of
> john@kk9a.com
> Sent: Sunday, June 18, 2017 9:44 PM
> To: towertalk@contesting.com; rfi@contesting.com
> Subject: [RFI] Snap-on Ferrites
>
> I was reading the recent QST article RF Mayhem by WB8IMY. The author
> said to avoid using snap-on ferrites for problems caused by HF signals
> as they rarely work well at HF. It is best to stick with circular cores.
>
> Is this correct? I was not aware that snap-ons were less effective.
>
> John KK9A
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
--
Charles M. Coldwell, W1CMC
Belmont, Massachusetts, New England
"Turn on, log in, tune out"
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|