|Subject:||Re: [RFI] Connectors for 1/2" tinned copper braid strap?|
|From:||"Roger (K8RI)" <firstname.lastname@example.org>|
|Date:||Wed, 28 Feb 2018 18:40:15 -0500|
Typically I just hear them called split nuts. They are widely available
by that name in Hardware, electrical, and automotive outlets.
Sizes "I've seen" for copper split nuts range from 1/4" to "really big!I use them on virtually all connections to wire antennas rather than solder. Currently I have some that have been up close to 16 years with no failures. Use a little never-seize to insure easy removal.
-- 73, Roger (K8RI) --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ RFI mailing list RFI@contesting.com http://lists.contesting.com/mailman/listinfo/rfi
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [RFI] RFI detective story - with successful outcome and 30 dBm reduction of noise floor, Gary Smith|
|Next by Date:||Re: [RFI] Connectors for 1/2" tinned copper braid strap?, Jim Brown|
|Previous by Thread:||Re: [RFI] Connectors for 1/2" tinned copper braid strap?, KD7JYK DM09|
|Next by Thread:||Re: [RFI] Connectors for 1/2" tinned copper braid strap?, Jim Brown|
|Indexes:||[Date] [Thread] [Top] [All Lists]|