I live in new construction (2018) with arc-fault and GFCI breakers all over the
house. I even had three arc-fault breakers installed in my attic after the
fact. (There were no outlets up there.) I have a full-length 40-meter dipole
and an MFJ Hi-Q Loop installed in the attic, and, so far, no issues at all with
the breakers. I also have a 2-m/440 J-pole up there. Granted, on HF I've run
only about 50 watts, occasionally 75, but so far so good. Most of the supplied
breakers appear to be Eaton. The ones added in the attic are, I think, Leviton.
Howard N7SO
> An electrician friend of mine told me the ARC-fault breakers are now required
> in National Electric Code 2020. He said it's a disaster for the customers
> and a big money maker for the electricians.
>
> It's not just RF that trips these, it's any appliances that are plugged into
> the circuit. It's required for all kitchen appliances and washer and dryers.
> Problem is, ACR-fault breakers used to say right on the box, "Do not use
> with motors." They probably think they solved that problem, but in fact have
> not.
>
> If NEC requirements are required for all changes and remodel projects, I
> suggest doing your own electrical work like I just did on a kitchen remodel.
> Other you will need to change them anyway out after the electrician is gone.
>
> 73, de ed -K0iL
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|