Re: [RFI] Power Line Noise

[Jim Brown <jim@audiosystemsgroup.com>]

On 4/16/2020 8:50 PM, K9MA wrote:
> I believe near field for antennas is generally considered to be about 
> 1/6 of a wavelength. That's only 11 feet on 20 meters.
It's significantly greater for arrays.

> Poorly bonded hardware near a single phase line is much more likely to
> be problematic than that near three phase sets, unless it's much
> closer to one of the phase lines.

This is one of several statements in this post that confuse power line 
currents with RF currents.
73, Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi