Synology RT2600ac - I use it here in my house... It sits right under
the corner of my horizontal loop, and have never 1) seen it take a hit
from the xmitter, or 2) show RFI in my P3...
It is a DC item, so you can run it on 12 VDC regulated down with a
linear regulator off your main linear supply and eliminate the wall wart
it uses for PSU.
It is also VERY flexible for remote restart, reboot, update, config, et
al.... Synology is awesome.
______________________
Clay Autery, KY5G
(318) 518-1389
On 05/31/20 09:03, Michael Coslo wrote:
Good day all,
I’m looking for a new router for our mountaintop station.
My needs are 2 and 5 GHz wireless, at least 4 ethernet. The main criteria is something
that isn’t sensitive to RFI. The last router we had was apt to reset whenever
someone transmitted on 40 meters. (Netgear) Any suggestions for a good router?
- 73 -
- Michael Coslo -
Frequency Coordinator, Beaver Stadium
814-404-3991
mjc5@psu.edu
mjcn3li@gmail.com
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|