Excellent documentation! I have found that 'fuzzy' traces don't always
communicate what you are attempting. I use the max hold function to better
display the magnitude of the interference between powered but off and
everything on.
Also, with your zero-span captures. What do the tynes represent? Possibly
run a relatively narrow span like 1 MHz or 0.5 MHz and a narrow RBW to
bring out the 6 kHz tyne spacing from the switcher. To the supplier, that
would nail the switcher as the problem.
Dave - WØLEV
On Tue, Sep 8, 2020 at 5:49 PM Karin Johnson <karinann@tampabay.rr.com>
wrote:
> Hello again group:
>
> I created a power point document outlining some of the measurements
>
> I've taken with regard to the RFI source from the new Rheem HVAC heat
>
> pump system recently installed.
>
> I've been accumulating as much documentation as I can via internet sites.
>
> Some of the user manuals are available, but the important ones regarding
>
> the Power inverter drive user manual and the communication baud rate from
>
> the ECONET thermostat are not available. I will continue to look.
>
> I am doing this work now with regard to information gathering so that I can
>
> address this issue with the installer to help me look at solutions without
>
> voiding any warranty should I take off mechanical coverings on the unit
> without their help.
>
>
>
> Here is a link to the document at Google Drive.
>
>
>
>
> https://drive.google.com/file/d/1FYIZseDnlsM8UMfnAGhPUjJ7aPMJ2xCT/view?usp=s
> haring
>
>
>
> I've allowed anyone to view this. It should work. If it doesn't let me
>
> Know via this forum and I will see if I set the permissions incorrectly.
>
>
>
> Karin Anne Johnson P.E. K3UU
>
> Palm Harbor, FL
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
--
*Dave - WØLEV*
*Just Let Darwin Work*
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|