Kenny ~
This summer we had 5 of that type of Utilitech LED's put into our kitchen.
The kitchen is probably less than 100 feet from my antennas.
Sorry - but I can't find the model number - but they are flat and like a
puck, as you say.
I monitor my station's noise floor very closely (by looking at Elecraft P3
panadapter with SVGA) and also walk around with an SDR connected to DF
loop.
I did a before vs. after test + an ON/OFF test --- and could detect no
increase in noise floor or RFI.
Note: There is NO DIMMER control installed.
These are not very expensive - and if purchased from big box store - they
can probably easily be returned.
73, Alan K0AV
On Mon, Nov 30, 2020 at 9:10 AM Kenny Silverman <kenny.k2kw@gmail.com>
wrote:
> Has anyone installed the Utilitech 1500765 recessed LED can/puck lights?
> Are the RFI issues?
>
> We’re converting a 14’ x 14’ tool shed to my radio shack. Due to limited
> ceiling space the contractor wanted to put in these lights.
>
> If not these, what other lighting would you suggest ? Regular ceiling
> cans are too deep.
>
> Regards , Kenny K2KW
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|