While it’s a more expensive route I decided to go to individual Meanwell
supplies as Gary noted for the seven Utilitech 1500767 lights were putting in
(he had them in his truck). These are canless 6” diameter LED lights. The 110v
wiring was already in place so this was the easier option rather than pulling
that and rewiring everything for low voltage.
I appreciate all your input and patience.
Regards , Kenny K2KW
> On Nov 30, 2020, at 2:29 PM, Gary Johnson <gwj@wb9jps.com> wrote:
>
> Search on Amazon for "12v led recessed light” and you’ll find many, sold for
> the RF and boat market. That looks like a really good solution, something I
> hadn’t really thought about. Thanks to Jim for the 12V suggestion.
>
> -Gary NA6O
>
>> On Nov 30, 2020, at 10:56 AM, rfi-request@contesting.com wrote:
>>
>>
>> Hi Jim et al.
>>
>> I think what I need to do is find 12v low voltage low profile can lighting
>> which goes to a common supply, and I provide the common supply. Any known
>> examples?
>>
>> While converting the shed they only have about 3-4? of depth for the
>> housing.
>>
>> Regards , Kenny
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|