RFI
[Top] [All Lists]

Re: [RFI] SOLAR INSTALLATION PROS/CONS

To: ny9h@arrl.net
Subject: Re: [RFI] SOLAR INSTALLATION PROS/CONS
From: Raymond Benny <rayn6vr@gmail.com>
Date: Tue, 25 May 2021 09:30:32 -0700
List-post: <mailto:rfi@contesting.com>
I also have an SMA inverter on my solar system and no noise. Its been
running for 3 full years. It is German made.

The other inverter that is RFI quiet is Fontus, not sure of the spelling.

Ray,
N6VR/W7YA

On Tue, May 25, 2021, 9:11 AM Bill Steffey NY9H <ny9h@arrl.net> wrote:

> I CHOSE SMA after going to several installations to check for RFI.
> I have 2   5000watt  units...NO NOISE...
>
> ON MAY 1ST  I made 69kWh !!!!
>
>
> On 5/25/2021 10:47 AM, Gary Johnson wrote:
> > Search for solaredge in our archives at
> http://lists.contesting.com/mailman/listinfo/rfi <
> http://lists.contesting.com/mailman/listinfo/rfi> and you will find
> hundreds of posts. The company was also the subject of a QST article by
> KQ6RS. In a word, SolarEdge is notorious for RFI problems due to their
> microinverters. The system installed next door is one of the reasons I no
> longer have a home station, if that tells you anything. But if the
> installer can supply Enphase, then you have a chance. If I had a choice,
> I’d go with a single, central inverter.
> >
> > -Gary NA6O
> >
> >> I have talked with the company (Sun Run Installation). He is going to
> check
> >> Solar Edge micro inverters to see if problems.  I believe they use Solar
> >> Edge but they have and can put Enphase micro inverters instead at a
> slightly
> >> higher cost.
> >>
> >> Thoughts???
> >>
> >> Robert T. Devine, KC6AWX
> >
> > _______________________________________________
> > RFI mailing list
> > RFI@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rfi
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
<Prev in Thread] Current Thread [Next in Thread>