Hugo and all,
I have looked at and tried the TinySA as an interference testing tool.
The sensitivity of the Tiny Sa only goes down to -100 dBm. I was thinking at
some point I would add a 20 dB preamp and try it again. As it is by itself with
the short vertical it is not sensitive enough to pick up much RFI. I
specifically am referring to 40, 80, and 160 meters. I did not try it on VHF
with a small beam. In addition, the small vertical antenna supplied with the
TinySA swings freely on its connector and will not stay vertical or horizontal.
Lee K7TJR OR
-----Original Message-----
From: RFI <rfi-bounces+k7tjr=msn.com@contesting.com> On Behalf Of Hugo Loranger
Sent: Wednesday, June 16, 2021 7:57 PM
To: RFI@contesting.com
Subject: [RFI] TinySA as an RFI research tool
Hi,
What do you think of TinySA as the main tool for RFI research in order to
intervene effectively instead of a simple portable HF radio?
73!
Hugo
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|