RFI
[Top] [All Lists]

Re: [RFI] Maintaining 50 Ohms...

To: "rfi@contesting.com" <rfi@contesting.com>
Subject: Re: [RFI] Maintaining 50 Ohms...
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Mon, 20 Sep 2021 19:56:17 -0700
List-post: <mailto:rfi@contesting.com>
Hi Hugo,

I'm confused by your question, and I suspect it's because you're confused too. I strongly suggest that you buy N0AX's book and spend a lot of time studying it. And/or the pdf slide deck on my website.

http://k9yc.com/GroundingAndAudio.pdf

73, Jim K9YC

On 9/20/2021 7:09 PM, Hugo Loranger wrote:
Hi Jim,

So, if on my SPG, my surge protector are screwed on the panel and that after I connect my chokes and that after they are connected to my remote antenna selector which is also fixed on the same panel, then my filters are useless since ground at both ends?

I would be better to reverse this and connect my choke to the input of my surge protector?



_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>